How to install the needle correctly

Turn off the power switch of the sewing machine!
1. Turn the handwheel counterclockwise to stop the needle position at the highest point. (If the needle is already in the upper position, it does not need to be rotated.)
2. Loosen the needle clamp screw with your right hand (turn the screw counterclockwise).
3. Remove the original needle with the left hand.
(Tips: You can first put a small piece of paper or cloth above the needle hole of the needle plate, so that if the machine needle is not held, it will not fall into the needle hole of the needle plate.)
4. Put the needle handle of the new needle back into the groove of the needle bar and push it up to the end.
5. Tighten the needle clamp screw with a screwdriver (turn the screw clockwise).
Note: Tighten properly, but do not overtighten the screws.